If set, this takes precedence over zimbraSpamHeader. A value of 0 indicates that there's no limit on an external share's lifetime. This parameter doesn't control access by third-party e-mail programs. The available options are Disable, HandsfreeOnly, and Allow. If set to 0, all e-mail will be converted to plain text before synchronization occurs. The value is specified in KB. This parameter doesn't affect third-party browsers. This parameter doesn't control access to e-mails using third-party mobile phone e-mail programs.
If the limit is exceeded, the HSM operation is repeated until all qualifying items are moved. The effective quota for a mailbox would be the minimum of this and zimbraMailQuota. If set, when errors happen in proxy, proxy will redirect to this URL with two paras - err: error code; up: the addr of upstream server connecting to which the error happens zimbraPrefAllowAddressForDelegatedSender email AllowAddressForDelegatedSender multi account,distributionList,group accountInfo,domainAdminModifiable 8.
If after this time the upstream server doesn't take new data, proxy will close the connection. ActiveSync for mobile devices. A value of 0 indicates no timeout. A value of 0 indicates that there's no limit on an internal share's lifetime. A value of 0 indicates that the URL never expires. If not set, all IP addresses are allowed. If multiple values are set, an IP address is allowed as long as it matches any one of the values. A value of 0 indicates that there's no limit on a public share's lifetime.
Template used to construct the subject of the notification message sent to the user when the user's account is auto provisioned. If this number is reached, proxy will refuse to connect to the current server, wait for zimbraMailProxyReconnectTimeout and then try to reconnect. Default value is 1.
Setting this to 0 means turning this check off. Note admin console proxy always use https no matter how this attr is set.
A value of 0 indicates that there's no limit on an internal file share's lifetime. A value of 0 indicates that there's no limit on an external file share's lifetime.
A value of 0 indicates that there's no limit on a public file share's lifetime. Value of 0 indicates that the external virtual account should never be automatically deleted. This would be helpful when multiple virtual host names are defined, but they are actually share the same configuration like ssl cert, client CA, This attr has to be set as "TRUE" to enable the features like cert per domain. This is an immutable property and is generated based on zimbraAdminBindAddress.
The servers configured here will only affect the proxy of pre-login requests. Proxy will only use the servers specified here to do the lookup. Account and command rate limits will still be applied. Typically should list nginx hostname and any other mailbox servers which can proxy to this server zimbraReverseProxyDnsLookupInServerEnabled boolean single server,globalConfig serverInherited 8.
If set false, the raw address configured e. If set to TRUE, users are not allowed to use the core app before zimlets are loaded. If set to FALSE, zimlets are loaded in the background and users are allowed to use the core app before all zimlets finish loading.
For document type mail items only, works independently of zimbraHsmPolicy. Email makes the max size of items to track for an Email folder to be If not specify, default value is Integer. This is applied when waiting for a new request to be received on a connection; when reading the headers and content of a request; when writing the headers and content of a response.
Threads that are idle for longer than this period may be stopped. Requests in excess of this are throttled. Measured in seconds, should not be more than 75 seconds. Can be used to enable or disable some converters zimbraFilePreviewMaxSize long single account,cos accountInfo,accountInherited 8. If empty, it's not part of AlwaysOn and is a stand-alone server. Account and command rate limits will not be applied.
This should only be used for internal servers which cannot service end user traffic; e. Default is to discard it zimbraAmavisMaxServers integer single globalConfig,server serverInherited mta 8. Defaults to true. Default is Greylisting in effect, sending server blacklisted zimbraAmavisLogLevel integer 5 0 single globalConfig,server serverInherited mta 8. Defaults to 1. Defaults to 16MB. Databases will not grow beyond this point. Comma separated list. Default is 1. Valid range is One attribute value per mechanism.
Defaults to 3. Defaults to 0. Defaults to 0 info. Used for debugging Jetty, not recommended for extended use in production environment. Defaults to yes zimbraAuthTokens string multi account ephemeral,dynamic,expirable 8. This setting takes effect only for default analyzer. This setting affects only accounts that do not have custom text analyzers. See zimbraTextAnalyzer for information on custom text analyzers.
This is default. Turning it off will get much better distribution of client connections between workers. Defaults to no zimbraServerVersion string single server 8.
The servers configured here will only affect the proxy of login URL requests. Order of selection is based on client preference and default Java order since Java SSLEngine does not allow changing the preference order. This is a DOSFilter style check for repeated failed logins from IP, if set to 0 no check happens, else failed login is recorded.
Defaults to on. Setting this to off will make nginx compare only the major and minor server versions eg. Format is "aa:bb:c", "aa" being the number of days to define stale data. It indicates the max size of data structures that holds the list of failed logins zimbraClamAVBindAddress string single globalConfig,server serverInherited mta 8. These are used while doing CSRF referer check. When set to true CSRF referer type check happens.
If disabled, changes of tombstones won't be synced to device zimbraLogOutFromAllServers boolean single account,cos accountInherited 8. If set to TRUE: when this account logs out on a server, the server will notify other servers that this account's authtoken has been invalidated. If set to FALSE, an auth token may remain vallid on servers other than the account's home server after a user logs out for as long as an account object remains in Provisioning Cache. When an account logs out of a server, the account's authtoken is added to a queue of invalidated tokens on the server.
Each server will send it's queue of invalidated tokens to all other servers with frequency configurable by this attribute.
Set to higher value to reduce network chatter. Set to lower value to decrease the window during which a stolen cookie may be reused to access an account. Note: touch client is a Network feature, this attribute is effective only if touch client is permitted by license.
In general, windows phone should be set to 2, iOS should be set to 1. Need to have 'm' for megabytes suffix at the end zimbraFeatureAdminPreferencesEnabled boolean single account,cos accountInfo,accountInherited 8. If configured, all IPs outside this whitelist will be blocked. Only consider changing this to another hashing function when working with authenticators that deviate from this standard. Keep at 6 for compatability with common TOTP clients.
This number should typically be small, but a minimum value of 1 is usually necessary to account for network latency and clock drift. This cache can improve performance by avoiding recomputing details frequently in a short period of time, for instance for each entry in search results.
If value is 0, the cache is disabled. The cache is particularly useful when significant use is made of delegated administration. Grantees objects provide a view of what rights a grantee has - although those are checked separately.
The longer the value of this setting is, the more stale the view of the details is likely to be. For this reason, the maximum accepted value is 30m.
This cache can improve performance by avoiding recomputing All Effective Rights of named entries like accounts frequently in a short period of time. All Effective Rights are computations of the rights that named entries like accounts have - although when used, they are checked separately. Single valued, commas separated list. Single valued, comma separated list. The accented characters will be compared 'as is' not be decomposed Collator.
When this mode is selected, compatible characters, such as half-width and full-width katakana characters, are considered equivalent Collator. If false, it moves focus. The value is case-sensitive. By default this value is 10GB. This is a rough limit,Due to internals of ehcache actual size on disk will often exceed this limit by a modest margin. Releases prior to 8. It should be changed to TRUE once all systems are upgraded to 8.
Use this attribute when you need to specify custom email headers such as charset and content-type. One can configure the system to act as a "Proxy" to another Zimbra system. When the Proxy mode is enabled, some accounts in the system would be syncing mailbox data from a Zimbra account hosted on a different Zimbra system into a data source.
Every time this attribute is changed, new messages that continue existing conversation threads in imported accounts will no longer thread with those conversations, and will instead start new ones. However they do not handle the MIME sent in responses correctly, and are unable to display messages in search results. Bugs - , This is actually a device issue, but it breaks visibility of email in search results on the device.
No limit if set to non-positive integer or unset. When this timestamp exceeds the timestamp of the shared secret, the server knows to disable two-factor authentication on the account and delete all associated data. Defaults to the United States mirror. If enabled, freshclam will download Google's safe browsing database. It indicates the delay before the cleanup task is executed for the first time. It also indicates the time interval at which the cleanup task will be re-run in case cleanup does not take place in first attempt zimbraMtaCanonicalMaps string single globalConfig,server serverInherited 8.
Any number of login attempts using password present in cache will be considered as single failed attempt. If Twofactor authentication enabled the cache size will be sum of zimbraPasswordLockoutSuppressionCacheSize and number of application specific password generated. IPV6 is supported as well. By default this value is 10MB. This is a rough limit,Due to internals of ehcache actual size in memory will often exceed this limit by a modest margin.
By default this value is 1 megabyte. By default this value is gigabytes. If empty, the NginxLookupExtension will select the mailbox server that hosts the account. Higher pool sizes allow for more simultaneous connections to SSDB. A value of 0 will cause the pool size to be unlimited. A value of 0 will cause the thread to block indefinitely. Values are in kilobytes. Includes the URL of the destination ephemeral store and the state of the migration in progress, completed, failed.
Retention period of messages in the Trash folder. Retention period of messages in the Junk folder. Template used to construct the sender of an email notification message. Template used to construct the subject of an email notification message.
Template used to construct the body of an email notification message. Maximum total size of a mail message. Value for postconf relayhost. URL of the server running the spell checking service. Whether to bind to port on startup irrespective of whether the server is enabled. If set to true, user is notified by email of changes made to her calendar by others via delegated calendar access. Network interface on which notification server should listen; if empty, binds to all interfaces.
Network interface on which SSL notification server should listen; if empty, binds to all interfaces. Note:"0" was chosen to mean "never" before reminders "at the time of event" were supported, hence the need to use "-1" to mean "At the time of event" instead of "0" which would be more intuitive to avoid breaking backwards compatibility.
An alias for this domain, used to determine default login domain based on URL client is visiting. Skins available for this account. Indicates the account is a resource used by the system. Which security layer to use for connection cleartext, ssl, tls, or tls if available. Whether this account can use any from address.
Not changeable by domain admin to allow arbitrary addresses. Addresses that this account is permitted to use in From: header on sent messages. Mailboxes in which the current account in archived. Address to which archive message bounces should be sent. An account or CoS setting - typically only in CoS - that tells the archiving system how to derive the archive mailbox name. An account or CoS setting that works with the name template that allows you to dictate the date format used in the name template.
The default is an LDAP generalized time format:. The maximum batch size for each ZimbraSync transaction. Object classes to add when creating a zimbra account object. Prior to 6. How zimbraDomainStatus affects account behavior : zimbraDomainStatus account behavior active zimbraAccountStatus locked zimbraAccountStatus if it is maintenance or pending or closed, else locked maintenance zimbraAccountStatus if it is pending or closed, else maintenance suspended zimbraAccountStatus if it is pending or closed, else maintenance shutdown zimbraAccountStatus if it is pending or closed, else maintenance closed closed.
Retention period of unread messages in the Inbox folder. Retention period of read messages in the Inbox folder. Retention period of messages in the Sent folder. Sleep time between subsequent mailbox purges. Virtual IP address for this domain, used to determine domain based on an IP address and have IP-based virtual hosts for the proxy. Incoming messages larger than this number of bytes are streamed to disk during LMTP delivery, instead of being read into memory.
If not set fallback to zimbraGalLdapPageSize. Note: If the virus notification address does not exist and your host name is the same as the domain name on the Zimbra server, the virus notifications queue in the Zimbra MTA server cannot be delivered.
Automatically set. SNMP Trap hostname. SMTP Source email address. SMTP Destination email address. When installed, it is automatically enabled. Logs from the hosts are sent to the mailbox server where zimbra-logger is installed and the information is used to generate the statistics graphs and for message tracing. The default is to install one zimbra-convertd on each zimbra-store server.
But only one zimbra-convertd needs to be present in a deployment depending on size of ZCS environment. This menu section lists major new features for the ZCS release and whether the feature is enabled or not. When you change the feature setting during ZCS installation, you change the default COS settings Having this control, lets you decide when to introduce new features to your users.
For Network Edition only, sets the schedule for Backup session to run as a full backup every Sunday at 1 a. When the installation and configuration is complete, if this is set to Yes , the Zimbra server is automatically started. At any time during the installation, you can save the configuration to file. Main Menu. LDAP master host. LDAP port. The default port is LDAP Admin password.
This is the master LDAP password. Require secure interprocess communications. Time Zone. Create Domain. Domain to create. LDAP Root password. LDAP Replication password. LDAP Postfix password. LDAP Amavis password. All rights reserved. Certified Community Search. Certified Webinars Forums. Page Discussion View source History.
Log in Request account. Zimlet Configuration File. You are looking at legacy Zimlet documentation. KB Last updated on 0. Try Zimbra Try Zimbra Collaboration with a day free trial.
0コメント